Tag Archives: 3hp motor with gearbox

R57 crompton 1 phase 3hp motor price near me made in China – replacement parts – in Asansol India Helical Geared Motor Gearbox with Output Flange with top quality

R57 crompton 1 phase 3hp motor cost around me  created in China - replacement elements -  in Asansol India  Helical Geared Motor Gearbox with Output Flange with prime high quality

We – EPG Team the most significant worm gearbox, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /


Type: R collection Foot-mounted Helical Gear Motors
Model: RF17-RF167
Brand name: YBANG
Color: Blue/Gray or on request
Substance: HT250
Enter energy: .twelve-160kw
Output torque: 1.4-23200N.m
Output pace: .06-1090rpm
Bearing: C&U Bearing,NSK,SKF or on request
Seal: SKF,CTY,CFW or on ask for
Origin: ZHangZhoug, China
Warranty: 1 12 months

Features of goods

1. Hugely Common Modular Created: The goods are simply related with and pushed by various kinds of motors and a variety of  input electricity. The identical type geared motor can be tailored to optioned powers of motors. It is as a result easy to comprehend diverse resolution for different specifications.

two. Ratio: Featured numerous intently divided ratios and broad assortment of them. Extremely huge closing ratios can be attained via blended unites to reach incredibly low output speeds.

3. Mounting Arrangement: No stringent limitation to the mounting arrangement.

four. High Strength, Compact Dimension: Housings are produced of large strength solid iron. Gears and shaft gears are concluded with gasoline carburizing process and specific grounding to sequentially get higher loading capability of per specific quantity.

five. Extended Services Daily life: Under the issue of properly choosing kind dimension and the standard routine maintenance and use, major components (expect individuals easily-disabled components) can last as extended as up to more than twenty five,000 hrs. Very easily-disabled parts incorporate lubricating oil, oil seals, and bearings.

6. Low Sound: All important components are finished by specifically machining, precise assembly, and ultimately tested, and consequently, reasonably minimal sound is achieved.

7. High Efficiency: The effectiveness of gear device can reach ninety five%, The performance of worm gear unit can achieve 89%.

eight. Big radial loading ability.

nine. Axial load ability of up to 5% of radial load.  




(1) With superb good quality and Sensible price tag

(2) Promise to shipping and delivery on time

(3) Secure, reliable, economical and sturdy

(4) Stable transmission, quiet operation

(5) Higher warmth-radiating efficiency, large carrying potential

(6) Each and every product need to be tested just before sending


Q: Are you ept company or maker?

A: We are producer.

Q: How lengthy is your supply time?

A: Generally it is 5-7 times right after the goods are produced. or it is ten-15 days if the products are huge in amount.

Q: Do you provid samples?

A: Yes, we could supply the sample if you buy more than 50 sets, but we will not pay out for the freight. And the charge will be return right after the transaction’s finishing.

Q: What details shall we give just before inserting a buy purchase?

A: You just need to offer the dimensions of the dimensions of the worm shaft and the ratio.


/ The use of unique products manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our business and the listed replacement areas contained herein are not sponsored, accepted, or made by the OEM. /

R57 crompton 1 section 3hp motor price tag in close proximity to me  created in China - alternative components -  in Asansol India  Helical Geared Motor Gearbox with Output Flange with best top quality

R57 crompton 1 phase 3hp motor price close to me  created in China - substitution components -  in Asansol India  Helical Geared Motor Gearbox with Output Flange with prime high quality

Best China manufacturer & factory NMRV110 with ratio15 worm gearbox worm speed reducer with 15hp 2hp 3hp electric motor With high quality best price

Best China manufacturer & factory NMRV110 with ratio15 worm gearbox worm speed reducer with 15hp 2hp 3hp electric motor With high quality best price

The new products include a series of high-tech and high quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, high-speed tooth chains, timing chains, self-lubrication chains, among which have type high speed tooth chain for car branch dynamic box and aerial chains fill in the blanks of chain in China.


Quick Details

Applicable Industries:

Manufacturing Plant

Brand Name:






Product name:

Worm Gear Screw Jack


Aluminium Alloy


Machine Tool







Mounting Position:

Flange Mounted

Input Form:

IEC Flange

Packaging & Delivery

Lead Time
Quantity(Pieces) 1 – 500 >500
Est. Time(days) 20 To be negotiated

Online Customization

Product Description


According to European standard of similar product,we adopt high-quality artificial oil,imported famous brand seal parts and manufacture technology to produce square multi-placed reductor. Feature beautiful appearance,easy installation,compact structure,low noise and high efficiency.
NMRV worm gear reducer absorbs advanced technology at home and abroad. It has a novel and unique “square box” external structure. The box is beautiful in shape and is made of high quality aluminium alloy by die casting.

NMRV series structure drawing

Worm Gear Speed Reducer  NMRV+DC Motor Hot Selling Point

Selling point 1

The main feature is that it has reverse self-locking function,

 Suitable for all-round installation.

Selling point 2

Small size, light weight, low noise, long service life.

Selling point 3

Using high quality materials, high quality heat treatment.

Selling point 4

We can customize the motor parameters according to the customer’s requirements.

Selling point 5

We will provide the best after-sales service.

Selling point 5

ZYT series permanent magnet DC motors, with the improvement of people’s living standards and the development of modern production and office automation, householdMaintenance Maintenance on these units is straight forward and like all moving parts these need their fair share of grease and should be greased regularly as these components work very hard and are subject to all that nature can provide for wear and tear. Good grease is essential here; put grease in until you see the old grease oozing out. Go easy on the “U” joints so you don’t blow the seals. Short bursts of a low pressured air grease gun or even better a hand pump gun will do the job and should be done based on hourly use. At least once a season the primary and secondary shafts should be separated. All debris and any rust should be cleaned off. Examine thoroughly for any signs of stress and apply a liberal amount of grease. In addition to this, both the PTO yoke holes need grease inside of them at least once a year along with the yoke lock pin. appliances, industrial robots and other equipment are becoming more and more rate-oriented, miniaturized and intelligent. As an important part of the executive components, the motor must have the characteristics of high precision, high speed and high efficiency. The application of DC brushless motors is also due to the fact that This has led to rapid growth.



20CrMn Ti material – low carbon alloy steel

Imported gear grinding machine processing, high hardness, stable performance.
Vacuum furnace carburizin”EPG” brand rotocultivator ploughshares in T.S. total lines produced in our factory have been tested and appraised by the Ministry of Agriculture and have obtained the license of popularizing farm machinery promulgated by the Ministry of Agriculture of the People’s Republic of China. g heat treatment, carburizing layer uniform.


The box body is made of HT200 material,which is cleaned by professional screening and washing equipment to ensure that the inner cavity of the box body is cleaner without iron filings.


New standard axle, multi-Machining of the gearbox To make a worm gearbox, first take a blank of an alloy. A bronze bearing is made in the center of the blank. The hobbing cutter is then used to reduce the diameter of the blank relative to the finished height of the tooth tip on the gear wheel, so the depth of the cut needs to be added to the blank’s diameter. The necessary threading tool is grind to cut the worm. The side clearance on the left-hand side of the cutter tip is allowed for the worm’s pitch angle. The best finish is put on the cutting tool using a slip stone. Gear blank is then mounted on a turntable that acts as a bearing support. This bearing support is mounted on the rear of the lathe cross-slide with the hobbing cutter mounted between the centers. The two worms are then machined, out of which one is made the cutter and finally the cutter is used to machine the worm gear.precision machining, through rigorous dynamic and static balance test, to ensure low noise and smooth operation of reducer

Company Profie

Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.
We have exported many products to our customers all over the world, we have long-time experience and strong technology support.

Some of our customer :
France: Itfran, Sedies, Kuhn
Brazil: AEMCO ,STU
USA: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
-> Our Company with over twelve year’s history and 1000 workers and 20 sales.
-> With over 100 Million USD sales in 2017
-> With advance machinery equipments
-> With large work capacity and high quality control, ISO certified.




Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us.

Packing & Delivery

Best China manufacturer & factory NMRV110 with ratio15 worm gearbox worm speed reducer with 15hp 2hp 3hp electric motor With high quality best price

Best China manufacturer & factory NMRV110 with ratio15 worm gearbox worm speed reducer with 15hp 2hp 3hp electric motor With high quality best price

Best China manufacturer & factory NMRV110 with ratio15 worm gearbox worm speed reducer with 15hp 2hp 3hp electric motor With high quality best price