Materials Managing Electrical power UNIT two
Common Description
This energy unit options electrical power up gravity down circuit. Activate the get started solenoid to begin the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the reducing velocity managed by the strain compensated movement handle valve. Merchandise of this series is often broadly used in the market of logistic units such as fork lift, mini lift table, and so on.
Unique Notes
one. The duty of this electrical power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all the hydraulic components concerned prior to mounting the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which should also be clean and cost-free of impurities, N46 hydraulic oil is advisable .
four. Oil transforming is needed immediately after the preliminary 100 operation hrs,afterwards the moment every 3000 hrs.
5. The electrical power unit ought to be mounted horizontally.

Materials Handling Energy UNIT one
Basic Description
This electrical power unit is made for the fork lift marketplace, consisting of really efficient gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are controlled by the lever from the guide release valve, which can be equipped with an electric switch to activate the motor. The lowing velocity is managed by the stress compensated flow management valve.
Exclusive Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned before set up of the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
four. Oil altering is required just after the first 100 operation hrs, afterwards after just about every 3000 hours.
five. The electrical power unit proven is created to be mounted horizontally.