Your Title Goes Here

1.A connecting website link of an O-ring Chain for basic application is pre-coated with grease on the pins. Just before connection, verify the grease over the surfaces of pins, and when the level of grease is little, apply grease with bare hands. (If gloves are utilized, the grease will probably be absorbed from the gloves.)
Instance: Once the connecting link (I) of an O-ring chain for general application is
shipped, O-rings are fitted in the roots on the pins. In case the O-rings come loose due to vibration in the course of transport, refit the O-rings in on the roots of the pins.
In this case, make sure you return the grease collected at the roots with the pins to your central surfaces of your pins, extra at portion A than at portions B shown from the over illustration. (Portions A is worn on account of sliding using the bushings.)
two.The chain might be most conveniently linked on the teeth of the sprocket. Engage the hyperlinks at each ends in the chain with the sprocket teeth and match connecting pins. Should the sprocket may be moved, the chain may also be linked around the loosened side.
3. Connecting method
1.Verify that O-rings are connected to the roots in the pins.
2.Should the level of grease utilized to the connecting pins is smaller, coat the pins with grease in the central portions.
three.Insert the connecting pins into the bushings of your inner links at both ends.
four.Confirm the grease is applied towards the complete encounter of the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and though pressing the connecting plate, set up the spring clip. Confirm regardless of whether the head (the end without a split) on the spring clip is turned from the feeding route of the chain. (See the following illustration.)
6.Make sure to confirm the spring clip is securely fitted during the clip grooves of the connecting pins.
This completes jointing on the connecting website link. Note that grease over the surfaces of connecting pins and O-rings may be removed throughout installation operate. In this instance, re-grease working with the grease within the surface of the base chain or the grease while in the polyethylene bag in which the connecting link was contained.

As one of leading car drive shaft manufacturers, suppliers and exporters of mechanical products, We offer car drive shaft and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of car drive shaft

Recent Posts