Due to their style and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive solution to impress you using its high level of performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP to you. These could be implemented separately in the modular program. In this way, they offer you an enormous range of sizes, equipment ratios and motor sizes.
However, their greatest strength is definitely their running smoothness and their extremely low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you are choosing a powerful drive solution which you will hardly actually hear.
The overall concept also offers you a lot more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations as opposed to single helical-worm gear models. This is one way you save extra energy in the procedure of your systems and are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide selection of AC motors. Furthermore, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits offered by this combination of low-noise helical-worm gear unit and performance-optimized motor. Even greater variance may be accomplished thanks to the optional flange or foot-mounted style and by choosing between solid and hollow shaft.
Save time and money
By opting for one of our gearmotors, you are already saving time and money with this selection and project planning. It is because our modular system allows a multitude of combination options for gear models and motors. You can for that reason reduce operating costs, helical worm gear motor depend on a long service life and reap the benefits of simplified maintenance that’s characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than single helical-worm gear units
Very low-noise operation
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
Combine the helical-worm equipment unit with our AC motors:
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional sturdiness and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft install or flange mounted configurations
Right Angled gear units
High permitted overhung loads
Helical-worm Gearmotor S Series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Because of their outstanding performance, these drives can be utilized in every industrial sector and tailored to person torque and quickness requirements. The reduction ratios afforded by the helical-worm equipment stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for basic applications.
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique combination of optimized worm wheel materials with unique lubricants, optimized form, this powerful motor achieves high levels of efficiency and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The low contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and better torque capacity in smaller sized sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, mounting pilots and flanges provide a wide variety of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Maintains contaminants and water away.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to simply accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new criteria for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration right now and a future proof alternative. The EP gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the electric motor frame offering for unparalleled integration opportunities.
EP gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a true total remedy for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is certainly dirt tight and hose evidence,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the output shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Because of the unique combination of optimized worm wheel materials with special lubricants and optimized form, this powerful geared motor achieves high degrees of performance and torque. The reduced contour design makes it ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The use of state of the art helical and worm equipment combinations affords optimum efficiency fulfilling a wide variety of ratio requirements. The 800 BR is usually functionally interchangeable with many major manufacturer’s drives.
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All models shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Output flange kits
Torque arm kits
Output shaft kits
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting result shafts
Dual and triple reduction ratios
Flanged or foot mounted
All systems adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternative for the standard duties anticipated of a right-angle drive.
5 equipment sizes (S0 to S4).
Motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is upon the motor shaft. This integrated small design can be an essential factor for the high accuracy and the incredible stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are made from case hardened alloy metal and the flanks are precision ground. The worm tires are made from particular wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, in addition to adjustable backlash styles are also part of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal design. The housings are manufactured from top quality cast iron. The rugget walls and internal ribbing ensure incredibly torsional stiff and noise dampening housings. The external ripping provides a rapid heat conducting.
Type S und SS
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with tough walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,along with adjustable backlash
Second shaft end for fitting encoders or brakes
Free input shaft
ATEX specification according to directive 94/9/EG